DC-DC 6V-32V TO 0.8-28V 150W Buck-Boost Voltage Regulator

Specification:

• Non-isolation model
• synchronous rectification
• Input voltage: DC 6V-32V （ rated output need input voltage >=9V)
• minimum pressure difference:0V
• Output voltage: DC  0.8-28V (adjustable)
• Output current:15A (MAX)
• Output Power:150W  (such as output 12V 13A)
• Conversion efficiency:97%
• Soft start time: about 500mS
• Output ripple : 1%(MAX)   20M bandwidth
• Working Temperature:industrial level(（-40℃-- +85℃）（please add the heatsink when environmental temperature above 40℃)
• Full loads Temperature:40℃
• Load regulation:±1%
• Voltage regulation:±0.5%
• Dynamic responding speed:5% 200uS
• Short-circuit protection:YES
• Input reverse connection protection:YES
• Input over-voltage protection circuit:YES (Protect piont 33V can't above 36V)
• LED:YES(normal working--green  anomaly or protection --red)
• Connection mode: plug-pull  8 X wiring terminals (every terminal MAX 6A Please parallel connection when need high current)
• Size:83(L)*45(W)*19(H) mm
• Enclosure material: Aluminium　

Application scope:

• 12V 24V universal  on board power (you just need input DC 12V or 24V then you can get DC 0.8-08V(Free  continuous regulation)
• Multipurpose Power supply for note-book
• Multipurpose on-board  regulator (such as the voltage of your car is 12V,but it will fall to 9V-10V when you start-upthe car,my be some electricals can not work normally,So you need this module to steady voltage.
• Battery regulator

Packing included: 

• DC-DC 6V-32V TO 0.8-28V 150W Buck-Boost voltage regulator  X 1