E-LINK FOR ARM Debugger/Emulator JTAG tool as J-LINK

E-Link FOR ARM is a special ARM Debugger/Emulator JTAG tool for ARM development desgin, Debug & download.

As a professional ARM JTAG emulator, E-LINK is compatible with most popular JLINK emulator in the market, which can be used with IAR EWARM, ADS, KEILMDK, WINARM, RealView and other integrated development environment that supports almost all of ARM7/ARM9/ARM11 core chip simulation via the RDI interface and the integrated development environment seamlessly, E-LINK highlight one of the highlights - Supported automatically firmware upgrade, perfect to learn to solve the problems of the majority of developers to upgrade the firmware problem. connection , convenient operation and easy to use.

E-LINK can be applied with the most popular ARM development boards currently, it achieved the best balance between cost/performance. It supportsand can be directly used with all kinds of STM32, 2440,6410 Series development board, including friendly arm mini2440 / micro2440 / mini6410/Tiny6410, Feiling FL2440/OK6410, China Tengen Real6410 products.

• * E-LINK is desgined with special chips, such as CPU, double buffering, USB port protection circuit, ESD, Auto-recovery fuse, including the 3.3V power supply chips; E-LINK external structure with red aluminum metal.
• * E-LINK LED can indicate E-LINK is to a variety of working conditions
• * E-LINK’s automatic firmware programming button is easy to use: When the firmware is missing, then state: When inserting JLINK, the computer will report un-recognized device, while E-LINK light is off. Fix : press E-LINK automatic firmware programming key for 3 seconds, release the button, wait for 40 seconds, and the internal firmware auto-upgrade will be complete, then we use SAM-BA tool to E-LINK E main chip programming -LINK.bin procedures.
• * E-LINK spacing is standard 10-Pin 2.0 standard JTAG interface, matching with friendlyarm development board.

E-Link ARM main feature: 

• * Automatic firmware upgrade (currently JLINK is prone to major defects in the firmware to be lost, used JLINK customers should have this experience: When the automatic upgrade JLINK when accidentally plug the USB cable, JLINK internal firmware be lost and need Depot, or to re-reply by disassemble the firmware. this version of the E-LINK perfect solution to this problem)
  
• * KEIL ADS IAR EWARM seamlessly integrated development environment with JTAG emulator
• * Support all ARM7/ARM9/ARM11 core chip, and Cortex M3, including Thumb mode
• * Support ADS, IAR, KEILMDK, WINARM, REALVIEW almost all development environments
• * Download speeds up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
• * The maximum JTAG speed 12 MHz
• * Target voltage range of 3V ~ 5V
• * Auto speed recognition
• * Monitoring all JTAG signals and the target board voltage
• * Fully plug and play
• * USB powered (but not the target board power supply)
• * With a USB cable and 10PIN 2.0 pitch pin flat cable, perfect to connect all kinds of friendly arm development board.
• * Support multi-device JTAG serial connection
• * With J-Link TCP / IP server, allows TCP / IP network using the J-Link

Supported ARM Core 

• * ARM7TDMI（Rev 1） 
• * ARM7TDMI（Rev 3） 
• * ARM7TDMI-S（Rev 4） 
• * ARM720T * ARM920T
• *ARM926EJ-S
• *ARM946E-S
• *ARM966E-S
• * ARM11
• * Cortex-M3

Package include:

• emulator x1
• 10pin JTAG cable x1
• Mini USB cable x1