PHLIPS BC electrolytic capacitor 2200uf/25V

• Moudle: 135KO
• Spec: 2200uf/25V
• Temp: 105C
• Dimension: φ18×20mm
• Pin pitch: 7.5mm
• Made in Austria
• Condition: 100% new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

PHLIPS BC electrolytic capacitor 36000uf/75V

• Module: 925790
• Spec: 36000uf/75V
• Temperature: 85C
• Dimension: φ77×150mm
• Made in Sweden
• Condition: 90% new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

PHLIPS electrolytic capacitor 15000uf/16V

• Spec: 15000uf/16V
• Temperature: 85C
• Dimension: φ30×31mm
  
• Made in Netherland
• Condition: Brand new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

Philips BC axial capacitor 1000uf 16v

• Module: 021
  
• Spec:1000uf/16V 85C
• Dimension: φ10×30mm
• Made in Netherland
• Condition: Brand New

Please note:

PHLIPS BC electrolytic capacitor 10uf/400V

• Module: 044 01
• Spec: 10uf/400V
• Temperature: 85
• Dimension: φ12.5×20mm
• Pin Pitch: 5mm
• Made in Austria
• Condition: Brand new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

PHLIPS BC electrolytic capacitor 220uf/25V

• Module:159 52102
• Spec: 220uf/25V
• Tempreture: 105C
• Dimension: φ25×31mm
• Pin pitch: 10mm
• Made in Israel
• Condition: Brand new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

PHLIPS BC electrolytic capacitor 47uf/400V

• Module: 159HP 13
• Spec: 47uf/400V
• Tempreture: 105C
• Dimension: φ22×36mm
• Pin pitch: 10mm
• Made in Israel
• Condition: Brand new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

PHLIPS BC axial electrolytic capacitor 47uf/63V

• Module: 138
• Spec: 47uf/63V
• Tempreture: 85C
• Dimension: φ8×18mm
• Made in Austria
• Condition: 100% new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

PHLIPS BC electrolytic capacitor 100uf/450V

• Module: 159
• Spec: 150uf/450V
• Temperature: 105
• Dimension: φ22×31mm
• Pin Pitch: 10mm
• Made in Austria
• Condition: Brand new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

4pcs PHLIPS BC electrolytic capacitor 220uf/450V

• Module: 09437221
• Spec: 150uf/450V
• Temperature: 105C
• Dimension: φ25×45mm
• Pin Pitch: 10mm
• Made in Israel
• Condition:Brand new

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

SIEMENS axial electrolytic capacitor 22uf500v

• Series: B43699 LL
• Capacity: 22uf
• Voltage: 500v
• Temperature: 105C
• Volume: φ13x39mm
• Made in Brazil
  
• Condition: Brand New

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

Panasonic FC electrolytic capacitor 470uf 25V

• Module: FC
• Capacity: 470V
• Voltage: 25V
• Tempreture: 105C
• Dimension: φ8×21mm
• Pin Pitch: 3mm
• Condition: Brand New

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

Panasonic FJ electrolytic capacitor 150uf 50V

• Module: FJ
  
• Capacity: 150V
• Voltage: 50V
• Tempreture: 105C
• Dimension: φ10×25mm
• Made in Malaysia
• Condition: Brand New

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

ROE axial electrolytic capacitor 47uf 10v

• Module: EB
  
• Capacity: 47uf
• Voltage: 10V
  
• Temperature: 85C
• Dimension: φ6×12mm
• Condition: Brand New
• Made in Germany ROE

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

ROE axial electrolytic capacitor 1000uf 16v

• Module: EB
• Capacity: 1000uf
• Voltage: 16v
  
• Temperature:105C
• Dimension: φ10×24mm
• Condition: Brand New
• Made in Germany ROE

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

Description:

The Device is a monolithic integrated high volt- age, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power tran- sistors. To simplify use as two bridges each pair of chan- nels is equipped with an enable input. A separate supply input is provided for the logic, allowing op- eration at a lower voltage and internal clamp di- odes are included. This device is suitable for use in switching appli- cations at frequencies up to 5 kHz.

• 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
• 1.2A PEAK OUTPUT CURRENT (non repeti- tive) PER CHANNEL
• ENABLE FACILITY
• OVERTEMPERATURE PROTECTION
• LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
• INTERNAL CLAMP DIODES
  

ABSOLUTE MAXIMUM RATINGS:

• Vs Supply voltage = 36 V
• Vss Logic Supply Voltage = 36V
• Vi Input signals = 7 V
• Ven Enable Voltage = 7 V
• Io Peak Output Current (100 μs non repetitive) = 1.2A
• Ptot Total Power Dissipation at Tpins = 90 �C = 4W
• Tstg, Tj Storage and Junction Temperature = -40 to 150�C

Driver: L298N Dual H Bridge DC Motor Driver IC
Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V
Driven part of the peak current Io: 2A
The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)
The logical part of the operating current range: 0 ~ 36mA
Control signal input voltage range:
Low:-0.3V ≤ Vin ≤ 1.5V
High: 2.3V ≤ Vin ≤ Vss
Size (L× W × H ) : Approx 25 × 20 × 10 mm
Weight: 5.6 g

Enable signal input voltage range:
Low: -0.3 ≤ Vin ≤ 1.5V (control signal is invalid)
High: 2.3V ≤ Vin ≤ Vss (control signal active)
Maximum power consumption: 20W (when the temperature T = 75 ℃)
Storage temperature: -25 ℃ ~ +130 ℃
Other Extensions: control of direction indicators, the logic part of the plate to take power interface.
Driver Board Size: 55mm x 49mm x 33mm (with fixed copper pillar and the heat sink height)
Driver Board Weight: 33g

L298N Dual H-Bridge Motor Driver Module for Arduino Step motor Smart car Robot

Feature

• Chip: L298N
• Logic voltage: 5V
• Logic current 0mA-36mA
• Storage Temperature: -20 ℃ to ℃ to +135
• Operating mode: H-bridge driver (dual)
• Drive voltage: 5V-35V
• Drive current: 2A (MAX single bridge)
• Maximum power: 25W
• Dimensions: 43x43x27mm

Port Fig.

Manufacturer: National Semiconductors

This listing include 25 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 25 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 25 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 25 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 50 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 50 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 50 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 50 pieces Potentiometers well packed in a anti-plastic tube.

Only 100pieces available for this product.

This listing include 25 pieces Potentiometers well packed in a anti-plastic tube.

This listing include 50 pieces Potentiometers well packed in a anti-plastic tube.

Kinsten Etching Tank Kit (Tank+Pump+Heater) ET-20

Kinsten etch tanks are suitable for etching single and double sided PCBs with most etchants. The thin, vertical standing, design uses minimal etchant. The tanks have graduations for easy measurement.

The Kinsten ET20 tank can etch a maximum PCB size of 23×30cm without heater, or 20×30cm with heater. Use with 2000cc minimum, 2300cc maximum liquid.
(1000cc = 1 litre)

Etch tanks include three clips to suspend the PCB in the liquid etchant, and a thermometer to monitor liquid temperature.

Options include an air pump to bubble agitate the etchant, and heater to maintain optimal etchant temperature, for more efficient etching.

The ET etch kits include etch tank, air pump, heater and thermometer.

Kinsten Etching Tank Kit (Tank+Pump+Heater) ET-10

Kinsten etch tanks are suitable for etching single and double sided PCBs with most etchants. The thin, vertical standing, design uses minimal etchant. The tanks have graduations for easy measurement.

The Kinsten ET10 tank can etch a maximum PCB size of 20×25cm without heater, or 17×25cm with heater. Use with 1000cc minimum, 1500cc maximum liquid.
(1000cc = 1 litre)

Etch tanks include three clips to suspend the PCB in the liquid etchant, and a thermometer to monitor liquid temperature.

Options include an air pump to bubble agitate the etchant, and heater to maintain optimal etchant temperature, for more efficient etching.

The ET etch kits include etch tank, air pump, heater and thermometer.

Features:

• Brand New High Quality
• Dimension: 11.2x 11mm.
• Built-in Philips TEA5767 FM IC.
• High sensitivity with integrated low-noise RF input amplifier.
• Frequency range: 87.5Mhz-108Mhz.
• Suitable for handheld applications.
• Built in 32.768khz clock crystal.
• PLL tuning system.

Intel’s advanced 802.11a/b/g/n Wi-Fi and Bluetooth combo adapter

for business and home. The Intel� Centrino� Advanced-N 6230 dual band

(2.4 GHz and 5 GHz), 2x2 adapter delivers up to 300 Mbps¹ bandwidth,

extended range and unique Intel-only features including Intel� Wireless

Display, and Intel� vPro™ technology support

DHT22/AM2302 Digital Temperature and Humidity Sensor

Features:

• Brand New High Quality
• Type:AM2302
• Accuracy resolution:0.1
• Humidity range:0-100%RH
• Temperature range:-40~80℃
• Humidity measurement precision:±2%RH
• Temperature measurement precision:±0.5℃
• 4-pin package
• ultra-low power
• No additional components
• excellent long-term stability
• All calibration, digital output
• completely interchangeable
• long distance signal transmission
• relative humidity and temperature measurement

1206 Ultra Bright SMD LED White 50pcs for 1 batch

Parameters:

This listing include 50 pieces Potentiometers well packed in a anti-plastic tube.

Height: 55mm

Second hand, Works well. No datasheet provided!

Second hand, Works well. No datasheet provided!

Never Used but seems old, Works well. No datasheet provided!

Second hand, Works well. No datasheet provided!

RED Pro HiFi Hybrid Tube Headphone Amplifier 6N11 AMP

Features:

• Pure Class A Headphone Amplifier & Pre Amplifier
• Hybrid ! Valve & MOS-FET in Use!!
• Without any OP amp IC inside!!!
• Audiophile Performance Design Absolutely!!!
• Our Indeed headphone amplifier is different to others.
• A/ High grade Caps , ALPS volume in use.
• B/ High cost Large 24V2A low noise adapter with grounding.
• C/ Precision select 6N11 valve, also match R/L channel within 1dB out put differential.

• New 6N11 tube 1970-1983 made in Peking mark with , but never used.
• In China means for military use (highest grade)
• (we have carefully choose and test in Lab).
• -Using Elna ,Wima Caps and Panasonic resistor.

• In Put Power: DC24V(INCLUDED)
  
• Input Sensitivity: 50mV
  
• Input Impedance: 100KOhm
  
• Out-Put Impedance: 20~600 Ohm
  
• Gain: 20dB
  
• Frequency response: 10Hz-60KHz +/- 0.25dB
  
• Signal/Noise Ratio: >91dB
  
• Dynamic range: 84.6dBA(300 ohm) 89.8dBA(33 ohm)
  
• THD: 0.016%(300 ohm) 0.45%(33 ohm)
  
• IMD + Noise: 0.045(300 ohm) 0.42(33ohm)
  
• Dimension:79mm (D) X 79mm (W) X 44mm (H)not measure to tube and transformer
  
• Shipping Weight: 0.58 kg

Package included:

• 6N11 AMP X1
• Power supply X1 (match 110-240V,dafeal US plug,and we have UK/AU/EU plug adapter for choice)

PAM8403 mini 5V power amplifier board(Support USB Power supply) 3W*2

This power Amplifier board adopts original PAM Digital power amplifier chip IC,simple design but steadily function!

Feature:

• Operating voltage: 2.5V-5.5V
• Maximum output power: 3W*2(5V 4Ω)
• PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
• Built with switch Potentiometer,can adjust the volume & control power switch freely!
• Flexible assembly usage.

Usage:

• suitable for battery or portable electronics products,suitable for long time steady usage.

Connection Layout:

Please note:

• Company expending price, no more bargain with retail quantity.
• in order to protect your benefit, please contact us for price negotiation if quantity is large.

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

Bi-color
Part No.	SG-50SR2YG2TM55-50N
Material	GaAlAs	GaP
Emitted Color	Super Bright Red	Yellow Green
Lens Color	Tiny Milky
Wavelength	643~660	568~572
Viewing Angle	55�	55�
Iv (mcd)@20mA	40	50

ARM11 Board 2G Tiny6410 S3C6410 Android + 4.3" TFT LCD

Features

Tiny6410 is a development board based on ARM11 chip(Samsung S3C6410), the CPU based on ARM1176JZF-S core design, internally integrated strong multi-media process unit, support Mpeg4, H.264/H.263 and many other video formats' files’ hard decoding, and can out put to LCD and TV display device simultaneously; it features 3D graphic hardware accelerator, to realize OpenGL eES 1.1 & 2.0 accelerated rendering, and it support 2D image's smooth zoom and flip, etc operations.

• • ARM11 Samsung S3C6410A, ARM1176JZF-S, run at 533Mhz ,up to 667Mhz
• • 256MB DDR RAM and 2GB NAND Flash
• • LCD/Touch Screen, CVBS/TV, Audio support
• • SD card, USB Host/OTG support
• • Ethernet, serial port, GPIO
• • GPRS/WIFI/GPS/Camera/3G module/USB Bluetooth support (option)
• • Linux 2.6.28, WinCE6.0, Ubuntu support
• • Support Android 2.3
• • Source code provide

Stamp Board Specification

• • Dimension: 64 x 50 x12 mm (L x W x H)
• • CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)
• • RAM: 256 DDR RAM, 32 bit Bus
• • Flash: 2GB MLC Nand Flash
• • Interface: 4 x User Leds, 10 pin 2.0mm space Jtag connector, Reset button on board
• Serial, SPI, USB, LCD, CMOS Camera
• • Connector : 2 x 60 pin 2.0mm space DIP connector
• 2 x 30 pin 2.0mm space GPIO connector
• • Power Supply: Supply Voltage from 2.0V to 6V

Stamp Board layout description

• • P1: Contain LCD, AD, SDIO2, EINT, USB, TVOUT0
• • P2: Serial port, SPI1, I2C, SD Card, AC97 (I2S), System bus
• • CON1: GPIO，AD，SPI0，TAVOUT1
• • CON2 : CMOS，GPIO
• • JTAG : JTAG interface
• • Others : 4 User LED, power LED, Reset key

Tiny6410 SDK board Resource:

• • CPU:Samsung S3C6410A(ARM1176JZF-S)
• • Frequency: Operating frequency 533Mhz, up to 667Mhz
• • RAM: 256 MB DDR RAM
• • Nand Flash:2GB Nand Flash
• • Multimedia: Support for Mpeg4, H.264, H.263, VC1 hardware decoding, up to 30fps @ SD
• • 3D: 3D hardware acceleration support
• • 2D: Promise to support graphics scaling, rotation, flip
• • Debug Port: COM0 + JTAG + USB Slave
• • Indicator: 4 x User LED (in the core board), 1 x Power LED
• • Test button: 8 x User Buttons, interrupt-style buttons
• • USB Slave: 1 x mini USB (OTG floor is not designed to function)
• • USB Host: Through the USB HUB chip, to achieve 4 USB Host
• • Network Interface: 10/100M MB Ethernet, RJ-45 interfaces
• • Audio I/O: Standard two-channel audio input 3.5mm input and output ports
• • SD Card: Normal SD card connector
• • Serial: 3 x RS232 DB9 serial port, 4 x TTL-level serial port Block
• • TV-OUT: 1 x RCA output
• • SDIO2 Interface : Mainly used to access SD WiFi module (also includes SPI, I2C interface)
• • LCD Interface: 3 LCD Interface Block leads (0.5mm pitch SMT, including seats, seat pin and 2.0mm pitch)
• • Buzzer: 1 x PWM control the buzzer output
• • IR: 1 channel infrared receiver
• • Temperature Sensor: 1 Road DS18B02 Temperature Sensor
• • ADC conversion: An adjustable resistor, connected CPU's AD0 channel
• • RTC clock: On-board battery backup RTC clock
• • Power Supply: 5V
• • PCB size: 180 x 130 mm

OS Support

• • Windows CE 6
• • Linux 2.6
• • Android
• • Ubuntu

Content List：

• Tiny6410 development board (With 2G NAND FLASH) x 1
• TFT LCD: 4.3" , with touch panelx 1
• DB9 Serial Converterx 1
• USB cablex 1
• Net cablex 1
• 5V power adapterx 1
• DVD-ROM with product referencex 1
• Touch Pen for touch panelx 1

E-LINK FOR ARM Debugger/Emulator JTAG tool as J-LINK

E-Link FOR ARM is a special ARM Debugger/Emulator JTAG tool for ARM development desgin, Debug & download.

As a professional ARM JTAG emulator, E-LINK is compatible with most popular JLINK emulator in the market, which can be used with IAR EWARM, ADS, KEILMDK, WINARM, RealView and other integrated development environment that supports almost all of ARM7/ARM9/ARM11 core chip simulation via the RDI interface and the integrated development environment seamlessly, E-LINK highlight one of the highlights - Supported automatically firmware upgrade, perfect to learn to solve the problems of the majority of developers to upgrade the firmware problem. connection , convenient operation and easy to use.

E-LINK can be applied with the most popular ARM development boards currently, it achieved the best balance between cost/performance. It supportsand can be directly used with all kinds of STM32, 2440,6410 Series development board, including friendly arm mini2440 / micro2440 / mini6410/Tiny6410, Feiling FL2440/OK6410, China Tengen Real6410 products.

• * E-LINK is desgined with special chips, such as CPU, double buffering, USB port protection circuit, ESD, Auto-recovery fuse, including the 3.3V power supply chips; E-LINK external structure with red aluminum metal.
• * E-LINK LED can indicate E-LINK is to a variety of working conditions
• * E-LINK’s automatic firmware programming button is easy to use: When the firmware is missing, then state: When inserting JLINK, the computer will report un-recognized device, while E-LINK light is off. Fix : press E-LINK automatic firmware programming key for 3 seconds, release the button, wait for 40 seconds, and the internal firmware auto-upgrade will be complete, then we use SAM-BA tool to E-LINK E main chip programming -LINK.bin procedures.
• * E-LINK spacing is standard 10-Pin 2.0 standard JTAG interface, matching with friendlyarm development board.

E-Link ARM main feature:

• * Automatic firmware upgrade (currently JLINK is prone to major defects in the firmware to be lost, used JLINK customers should have this experience: When the automatic upgrade JLINK when accidentally plug the USB cable, JLINK internal firmware be lost and need Depot, or to re-reply by disassemble the firmware. this version of the E-LINK perfect solution to this problem)
  
• * KEIL ADS IAR EWARM seamlessly integrated development environment with JTAG emulator
• * Support all ARM7/ARM9/ARM11 core chip, and Cortex M3, including Thumb mode
• * Support ADS, IAR, KEILMDK, WINARM, REALVIEW almost all development environments
• * Download speeds up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
• * The maximum JTAG speed 12 MHz
• * Target voltage range of 3V ~ 5V
• * Auto speed recognition
• * Monitoring all JTAG signals and the target board voltage
• * Fully plug and play
• * USB powered (but not the target board power supply)
• * With a USB cable and 10PIN 2.0 pitch pin flat cable, perfect to connect all kinds of friendly arm development board.
• * Support multi-device JTAG serial connection
• * With J-Link TCP / IP server, allows TCP / IP network using the J-Link

Supported ARM Core

• * ARM7TDMI（Rev 1）
• * ARM7TDMI（Rev 3）
• * ARM7TDMI-S（Rev 4）
• * ARM720T * ARM920T
• *ARM926EJ-S
• *ARM946E-S
• *ARM966E-S
• * ARM11
• * Cortex-M3

Package include:

• emulator x1
• 10pin JTAG cable x1
• Mini USB cable x1

DC Mini 0-9.99A Digital Panel Ampmeter Red/Blue/Green for Choice

DC 3.2-30V Digital Panel Voltmeter Red/Blue/Green for Choice

This item for 1pieces of Brand new 3.2v – 30v voltage counter. 2 Wires, Direct connection / Measurement. No need external power

Feature:

• Dim: 20*23*11mm (excluding ear)
• Display: 0.36”
• Measuring range: DC3.2-30V
• Display color: Blue
• Refresh rate: about 500mS / times
• Resolution: 1% +1 digit
• Power Supply: DC3.2-30V (with the input common-line)
• Operating temperature: -10 ℃ ~ 65 ℃
• Wiring connection:
• Red: V+ Positive
• Black: V- Negative

Package include :

• 1x Digital Voltmeter

DC 0-99V Digital Panel Voltmeter Red/Blue/Green for Choice

Feature:

• Dimensions: 48x29x21mm (L x W x H)
• Range: DC 0 ~ 99.9V
• Display: Three 0.56" LED digital tube
• Display color: Green
• Refresh rate: about 500mS / times
• Input: DC voltage (<1.2 times the range)
• Accuracy: 1 %(+/- 1 digit)
• Power Supply: DC7-25V (without regulator)
• Operating temperature: -10 ℃ ~ 65 ℃
  

Wiring：

• White lines: Measured Voltage +0V ~ 99V
• Red line: Power Supply +7V ~ 25V
• Black line: Common Negative
  

Package Includes:

• 1x Digital Voltmeter

High Efficiency Solar Cell 2V 50mA 0.1W

Parameters:

• Rated Voltage: 2V
• Rated current: 50mA
• Power: 0.1W(100% garantee)
• Dimension: 29*59mm or 26*60mm
  
• Thickness: 2.6-3.2mm
  
• Life span: 5-10 years
• Solar Wafer: Made in Germany
• Material: Monocrystalline silicon/Polycrystalline silicon

Basic knowledge about solar panels:

batteries Solar panel voltage

1.2V 2-2.5V

2.4V 3.5-4V

3.6V 5-6V

6V 7.5-9V

12V 15-18V

Color Wheel Inductor kit 11 Values 10pcs per value 110pcs in total

The kit includes 10pcs each of the following values:

1UH

10UH

22UH

33UH

47UH

100UH

150UH

220UH

330UH

470UH

1MH

LC200-A Inductance Capacitance L/C Multimeter Meter

Specifications:

• - Product is brand new
• - Modle:LC200A
• - Measurement accuracy:1%
• - Capacitance measuring scope: 0.01 pF - 10uF
• - The minimum resolution: 0.01 pF
• - Big Capacitance measuring scope:1uF-100mF
• - The minimum resolution:0.01UF
• - Inductance measuring scope: 0.001 uH - 100mH
• - Big inductance measuring scope: 0.001 mH - 100H
• - The minimum resolution: 0.001uH
• - Test frequency: L/C about 500KHZ Big inductance about 500HZ(can display current test frequency value)
• - Effective display digits: 4 digits
• - LCD display mode: 1602
• - Power supply: miniUSB interface 4X1.5V 5# battey Or DC 5V adaptor

NOTE:

• Before testing a Capacitance or inductance,Please reset to zero,if you test a Capacitance,
• And find the value is unstable,that meaning this capacitance's stability or frequency characteristic is very poor

Package include:

• 1. LC200A Inductance Capacitance L/C Multimeter Meter Tool * 1pcs
• 2. DC 5V Power Supply * 1pcs
• 3. Test cable * 2pcs
• 4. SMD Test clips * 1pcs

Please Note:

• This item is not a mixed resistor pack. The following table is for choice reference only.

• Each value is sold on 5000 pcs mutiples(one reel). Shorter than 5000 pcs for one value is not for sell.

• Please leave the values in the Value box when you checkout.

Values for choose: 11M, 12M,13M,15M,16M,18M,20M,22M

Please Note:

• This item is not a mixed resistor pack. The following table is for choice reference only.

• Each value is sold on 5000 pcs mutiples(one reel). Shorter than 5000 pcs for one value is not for sell.

• Please leave the values in the Value box when you checkout.

Values for choose: 11M, 12M,13M,15M,16M,18M,20M,22M

Please Note:

• This item is not a mixed resistor pack. The following table is for choice reference only.

• Each value is sold on 10000 pieces(one reel). Shorter than 10000 pcs for one value is not for sell.

• Please leave the values in the Value box when you checkout

Values for choose: 11M, 12M,13M,15M,16M,18M,20M,22M

Please Note:

• This item is not a mixed resistor pack. The following table is for choice reference only.

• Each value is sold on 10000 pieces(one reel). Shorter than 10000 pcs for one value is not for sell.

• Please leave the values in the Value box when you checkout.

Worldwide Universal Resistor Value Table
Value1 Value2 Value3 Value4 Value5 Value6 Value7 Value8 Value9
0 Ω 1.0Ω 10Ω 100Ω 1.0K 10K 100K 1.0M 10M
1.1Ω 11Ω 110Ω 1.1K 11K 110K 1.1M
1.2Ω 12Ω 120Ω 1.2K 12K 120K 1.2M
1.3Ω 13Ω 130Ω 1.3K 13K 130K 1.3M
1.5Ω 15Ω 150Ω 1.5K 15K 150K 1.5M
1.6Ω 16Ω 160Ω 1.6K 16K 160K 1.6M
1.8Ω 18Ω 180Ω 1.8K 18K 180K 1.8M
2.0Ω 20Ω 200Ω 2.0K 20K 200K 2.0M
2.2Ω 22Ω 220Ω 2.2K 22K 220K 2.2M
2.4Ω 24Ω 240Ω 2.4K 24K 240K 2.4M
2.7Ω 27Ω 270Ω 2.7K 27K 270K 2.7M
3.0Ω 30Ω 300Ω 3.0K 30K 300K 3.0M
3.3Ω 33Ω 330Ω 3.3K 33K 330K 3.3M
3.6Ω 36Ω 360Ω 3.6K 36K 360K 3.6M
3.9Ω 39Ω 390Ω 3.9K 39K 390K 3.9M
4.3Ω 43Ω 430Ω 4.3K 43K 430K 4.3M
4.7Ω 47Ω 470Ω 4.7K 47K 470K 4.7M
5.1Ω 51Ω 510Ω 5.1K 51K 510K 5.1M
5.6Ω 56Ω 560Ω 5.6K 56K 560K 5.6M
6.2Ω 62Ω 620Ω 6.2K 62K 620K 6.2M
6.8Ω 68Ω 680Ω 6.8K 68K 680K 6.8M
7.5Ω 75Ω 750Ω 7.5K 75K 750K 7.5M
8.2Ω 82Ω 820Ω 8.2K 82K 820K 8.2M
9.1Ω 91Ω 910Ω 9.1K 91K 910K 9.1M

TCS3200D programmable color light-to-frequency converter

Waterproof DS18B20 Waterproof stainless steel encapsulated temperature sensor

Waterproof stainless steel encapsulated temperature sensor (DS18B20)

Probe with temperature sensor DS18B20 (DETAILED INFORMATION HERE)

This is an electronic thermometer which has high accuracy over a wide range (accurate to ±0.5�C over the range of -10�C to +85�C). You can locate these thermometer chips up to 100M away from your Arduino, over just 2 wires. Multiple thermometers can be connected on the same wire because every one has it's own internal address.

High-quality stainless steel anti-rust waterproof package

Stainless steel housing (6 * 30mm), lead length 100cm

After rigorous testing of each probe it is individually wrapped

3.0V ~ 5.5V power supply

9 to 12-bit adjustable resolution

Wide temperature range -55 ℃ ~ +125 ℃

No external components, unique "1-wire" interface

Output leads: red (VCC), blue (DATA), black (GND)

Please note:

• Company expending price, no more bargain with retail quantity.
• in order to protect your benefit, please contact us for price negotiation if quantity is large.

Quality commitment:

• Brand new and genuine products if no special illustration.
• Keep the receipt or invoice with care to ensure Quality Warranty.
• Wrong purchase is not for exchange if no quality issue exists.
• Damage or misemploy to products is not for guarantee.
• If bad quality issues can be proved, please return the original package within 5 days. Exchanged ones would be resent once we receive the item.

Contact Us

• Please contact us directly from the online chat or sending email to us.
• For sales issue please contact sales@satistronics.com
• For technology issues please contact support@satistronics.com

HD44780 16x2 characters LCD module Blue backlight

Be aware: Power supply for this module is 3.3V!

Parameters:

• Module Size(W×H×T): 80.0×36.0×12.0mm
• Viewing Area(W×H): 64.5×14.0mm
• Character Size(W×H): 3.00×5.02mm
• Dot Size(W×H): 0.52×0.54mm

Datasheet Download:

Long-term supply at factory price. Quantity within 200 pcs normally can be shipped out within 5 days. Quantity between 200-1000pcs would take 1 week or so. Qantity over 1000pcs normally takes over two weeks for production and proceeding.

HD44780 16x2 characters LCD module Green backlight 3.3V

Be aware: Power supply for this module is 3.3V!

Parameters:

• Module Size(W×H×T): 80.0×36.0×12.0mm
• Viewing Area(W×H): 64.5×14.0mm
• Character Size(W×H): 3.00×5.02mm
• Dot Size(W×H): 0.52×0.54mm

Datasheet Download:

Long-term supply at factory price. Quantity within 200 pcs normally can be shipped out within 5 days. Quantity between 200-1000pcs would take 1 week or so. Qantity over 1000pcs normally takes over two weeks for production and proceeding.

Bread Board Power Supply Shield (5V/3.3V compatible)

Features :
-5v/3.3v output
-For MB102 Breadboard
-PCB Size: 35mm*45mm

Bread Board Power Supply Shield (5V/3.3V compatible)

This breadboard power shield support Mini USB power supply and Power jack 7-12V supply. There are two independent power that 5V/3.3V optional.

50pcs PCB Mount Terminal Block, 2.54mm, 2 Pin, Rising Clamp Screw Type

Be noted: PCB Mount Terminal Block, 2.54mm, 2 Pin, Rising Clamp Screw Type, RoHS compliant and lead free. Please note that the image on the right shows a 3, 5 and 8 pin connector, but this product is a single 3 pin connector!

Description:

Material:

Screws: M1.5 Steel Zinc plated Pin Header: Brass, Tin plated Contact: Brass, Ni plated Housing: PA66, UL94V-0 RoHS compliant and lead free

Electrical:

Rated voltage: 150V Rated current: 6A Contact resistance: 20 mΩ Insulation resistance: 5000MΩ/1000V Withstanding voltage: AC2000V/1Min Wire range: 26-18AWG 1mm2

Mechanical:

Temperature range: -40℃ to +105℃ Torque: 0.15Nm(1.3lb.in) Strip length: 3.7mm to 4.7mm

Dimension:

50pcs Female 3 pin 3.81mm Terminal Block, Screw Type

Be noted: Female 3 pin 3.81mm Terminal Block, Screw Type. Please note that the image shown might be of a connector with a different number of pins!

Specifications:

• Rated voltage: 300V
• Rated current: 8A
• Wire Range: 28-16AWG1.5mm2
• Withstanding voltage: AC2000V/1Min
• Insulation resistance: 5000MΩ/1000V
• Contact resistance: 20 mΩ
• Temperature range: -40℃ to +105℃
• Torque: 0.2Nm(1.7Lb.in)
• Strip Length: 6-7mm
• Housing: PA66, UL94V-0
• Screws: M2, steel, Zinc plated
• Contact: Phosphor Bronz
• RoHS compliant and lead free

Dimension:

150W DC-DC 10-32V to 12-35V Converter Boost Charger

Featrure:

• Module Properties: non-isolated step-up module (BOOST)
• Input voltage :10-32V
• Output voltage: 12-35V (adjustable)
• Output Current: 10A (MAX)
• Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
• Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)
• Easy to drive 65W 90W dual-core notebook.
• Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45�c
• Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)
• Output Ripple: 2% (MAX) 20M-bandwidth
• Operating Temperature: Industrial (-40�c to +85�c) (ambient temperature exceeds 40�c, lower power use, or to enhance heat dissipation)
• Full load temperature rise: 45�c
• No-load current: 25mA typical
• Voltage regulation: ± 0.5%
• Dynamic response speed: 5% 200uS
• Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
• Input Reverse Polarity Protection: None (Please Series diode at the input port.)

Typical Applications:

• 1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage.
• 2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.
• 3. Boost charger. You can use the 12V power supply to charge battery more than 12V, for example, 24V battery.

Package Includes:

• 1x 150W Boost Converter

120W DC-DC 10-32V to 35-60V Converter Boost Charger

Featrure:

• Module Properties: non-isolated step-up module (BOOST)
• Input voltage :10-32V
• Output voltage: 35-60V (adjustable)
• Output Current: 5A (MAX)
• Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
• Output power: natural cooling 80W (MAX), enhance heat dissipation 120W (MAX)
• Conversion efficiency: 90% typical (reference)
• Output Ripple: 2% (MAX) 20M-bandwidth
• Operating Temperature: Industrial (-40�c to +85�c) (ambient temperature exceeds 40�c, lower power use, or to enhance heat dissipation)
• Full load temperature rise: 45�c
• No-load current: 25mA typical
• Load regulation: ± 0.5%
• Voltage regulation: ± 0.5%
• Dynamic response speed: 5% 200uS
• Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
• Input Reverse Polarity Protection: None (Please Series diode at the input port.)
• Weight: 67g

Typical Applications:

• 1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 35-60V(adjustable freely), However, the output voltage can not be less than the input voltage.
• 2. Boost charger. You can use the 12V power supply to charge battery more than 12V, for example, 48V battery.
• 3. Solar battery charger for electric vehicles

Package Includes:

• 1x 120W Boost Converter

Arduino Nano V3.0 AVR ATmega328 P-20AU board+USB cable

Description:

• Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It's intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments. Arduino can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators. The microcontroller on the board is programmed using the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). Arduino projects can be stand-alone or they can communicate with software on running on a computer (e.g. Flash, Processing, MaxMSP).
  
• Arduino Nano has very compact size (0.73" x 1.70")
• New Version V3.0 is using Atmega328p
• Input Voltage limit is 6 - 20 V
• It can be power by usb port.
• BOOTLOADER loaded, READY to use

Package Content:

• 1 x Arduino NANO 3.0/V3.0 ATMEGA328
• 1 x Free Mini USB Cable

65 in 1 Precision Screwdriver Set

Features:

• Easy to disassembly and assembly ,According to different needs adjust the length.
• Complete specifications, to adapt to various different areas of work.
• Screwdriver with Ming vanadium steel (6150^#).
• HRC 52^。__ 56^。
  

Two-headed Tin plated Electronic Wire AWG22 80mm 500pcs/lot

This is not a mixed kit. Please choose the color of the PVC above.

Parameters:

• Lengh: 80mm
• AWG: 22
• Rated temp.: 80�C
• Rated voltage: 300V

500pcs in one lot!

ARM DSO Nano Digital Oscilloscope Probe, 1:1 and 1:10 adjustable MCX 20MHz

Nokia 5110/3310 Monochrome LCD Black on Blue

Nokia 5110 LCD is a 84*48 pixels matrix LCD. . Black text on White background.

Nokia 5110 LCD is low-cost, monochrome LCD with 84x48 display. It is popular for 8-bit AVR/PIC projects, search google for 'Nokia 5510 LCD', and you will find lots of resources.

It's compatible with Nokia 3110 , the code is the same for Nokia 3110 and 5110 , so there is the ready-made arduino library for this LCD .

Documents:

• Library for Arduino
• Download the Datasheet Here

Nokia 5110/3310 Monochrome LCD Black on White

Nokia 5110 LCD is a 84*48 pixels matrix LCD. . Black text on White background.

Nokia 5110 LCD is low-cost, monochrome LCD with 84x48 display. It is popular for 8-bit AVR/PIC projects, search google for 'Nokia 5510 LCD', and you will find lots of resources.

It's compatible with Nokia 3110 , the code is the same for Nokia 3110 and 5110 , so there is the ready-made arduino library for this LCD .

Documents:

• Library for Arduino
• Download the Datasheet Here

Parting agent

Customer are supposed know how to use it before you buy it.

It's useful for opening many cases. Include two types for different gaps.

The listing is for 1pcs.

Magnifying Glass With Light(Without Battery)

Great product for watching IC,PCB circuit etc.. Working with two AAA batteries (ship without batteries).
Light and tiny, great to have one in your pocket.

Tweezers made from bamboo have a gentle grip and will not damage small optics or other delicate objects.

They also have excellent insulation and are chemical-resistant. Tweezers are supplied with sandpaper to polish/shape the tips to a fine point. Non-magnetic. Non-conductive.

45 in 1 Precision Screwdriver Set

Features:

• Easy to disassembly and assembly ,According to different needs adjust the length.
• Complete specifications, to adapt to various different areas of work.
• Screwdriver with Ming vanadium steel (6150^#).
• HRC 52^。__ 56^。
  

Two-headed Tin plated Electronic Wire AWG22 100mm 500pcs/lot

This is not a mixed kit. Please choose the color of the PVC above.

Parameters:

• Lengh: 100mm
• AWG: 22
• Rated temp.: 80�C
• Rated voltage: 300V

500pcs in one lot!

Two-headed Tin plated Electronic Wire AWG22 150mm 500pcs/lot

Parameters:

• Lengh: 150mm
• AWG: 22
• Rated temp.: 80�C
• Rated voltage: 300V

500pcs in one lot!

Two-headed Tin plated Electronic Wire AWG22 50mm 500pcs/lot

This is not a mixed kit. Please choose the color of the PVC above.

Parameters:

• Lengh: 50mm
• AWG: 22
• Rated temp.: 80�C
• Rated voltage: 300V

500pcs in one lot!

0603 Ultra Bright SMD LED Warm White 100 pieces

Parameters:

Helping Hand with Magnifying Glass Soldering Tool

Details:
• The practical tool for soldering work, electronics and model making.
• Two adjustable locking arms with aligator jaws and magnifying glass can be configured in many ways.
• Heavy and sturdy cast-iron base prevents movement of work.
• Magnifier improves field of vision for small objects.

Condition:
• New in package

LC100-A High precision Inductance / Capacitance meter

LC100-A is a new upgrade 2 version,more accurate than old version,and it has include big inductance measuring+ big Capacitance measuring.

LC100-A Technical indicators:

• Measurement accuracy:1%
  
• Capacitance measuring scope: 0.01 pF - 10uF
  
• The minimum resolution: 0.01 pF
  
• Big Capacitance measuring scope:1uF-100mF
  
• The minimum resolution:0.01UF
  
• Inductance measuring scope: 0.001 uH - 100mH
  
• Big inductance measuring scope: 0.001 mH - 100H
  
• The minimum resolution: 0.001uH
  
• Test frequency: L/C about 500KHZ Big inductance about 500HZ(can display current test frequency value)
  
• Effective display digits: 4 digits
  
• LCD display mode: 1602
  
• Supply supply: miniUSB interface

Note: before testing a Capacitance or inductance,Please reset to zero,if you test a Capacitance,and find the value is unstable,that meaning this capacitance's stability or frequency characteristic is very poor,

packing included:

• LC100-A High precision Inductance meters Capacitance meter X 1
• USB line X1

GS6300 3A 52kHz 40V Buck Li Battery Charge

General Description

The GS6300 is a 52KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 3A load with high efficiency, low ripple and excellent line and load regulation. Requiring a minimum number of external components, the regulator is simple to use and include internal frequency compensation and a fixed-frequency oscillator. The PWM control circuit is able to adjust the duty ratio linearly from 0 to 100%. An over current protection function is built inside. An internal compensation block is built in to minimize external component count.

Features

• „ Wide 4.5V to 40V Input Voltage Range
• „ Output Adjustable from 1.235V to 37V
• „ Minimum Drop Out 1.5V
• „ Fixed 52kHz Switching Frequency
• „ 3A Constant Output Current Capability
• „ Internal Optimize Power Transistor
• „ Excellent line and load regulation
• „ With output constant current loop
• „ Built in thermal shutdown function
• „ Built in current limit function
• „ Built in output over voltage protection
• „ TO263-5L package

Applications

• „ Car Charger
• „ Battery Charger

Datasheet Download

CN5612 Low-Dropout High-Power LED Driver 50pcs/lot

General Description:

The CN5612 current regulator operates from a 2.7V to 6V input voltage range and delivers a constant current that is up to 1.2A to high-brightness LEDs, including high-brightness white LED. The LED current of CN5612 can be adjusted from 30mA to 1.2A by using an external resistor. An on-chip pass element minimizes external components while providing ±8% output current accuracy. Additional features include over temperature protection, LED short and open protection. The CN5612 is available in a thermally enhanced 5-pin TO252 package.

Applications:

 High-Power LED Driver

 LED Cap-Lamp

 Flash Light and Lighting

 Cell Phone, DSC and MP3 Player

 LCD and Keyboard Backlight

Features:

 Operating Supply Voltage Range: 2.7V to 6V

 On-chip Pass Element

 Low-Dropout Voltage

 Adjustable Output Current up to 1.2A

 Output Current Accuracy: ±8%

 Over Temperature Protection

 LED Open/Short Protection

 Operating Temperature Range:

－40℃ to 85℃

 Available in 5-pin TO252 Packages

Datasheet Download

PT4115 30V, 1.2A Step-down High Brightness LED Driver with 5000:1 Dimming 50pcs/lot

GENERAL DESCRIPTION

The PT4115 is a continuous conduction mode inductive step-down converter, designed for driving single or multiple series connected LED efficiently from a voltage source higher than the total LED chain voltage. The device operates from an input supply between 8V and 30V and provides an externally adjustable output current of up to 1.2A. Depending upon the supply voltage and external components, the PT4115can provide more than 30 watts of output power. The PT4115 includes the power switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current, and a dedicated DIM input accepts either a DC voltage or a wide range of pulsed dimming. Applying a voltage of 0.3V or lower to the DIM pin turns the output off and switches the device into a low current standby state. The PT4115 is available in SOT89-5 and ESOP8 packages.

FEATURES

• Simple low parts count
• Wide input voltage range: 8V to 30V
• Up to 1.2A output current
• Single pin on/off and brightness control using DC voltage or PWM
• Up to 1MHz switching frequency
• Typical 5% output current accuracy
• Inherent open-circuit LED protection
• High efficiency (up to 97%)
• High-Side Current Sense
• Hysteretic Control: No Compensatio
• Adjustable Constant LED Current
• ESOP8 package for large output power application

APPLICATIONS

• Low voltage halogen replacement LEDs
• Automotive lighting
• Low voltage industrial lighting
• LED back-up lighting
• z Illuminated signs
• SELV lighting
• LCD TV backlighting

Datasheet Download: http://www.micro-bridge.com/data/CRpowtech/PT4115E.pdf