MH-Z19B Infrared Carbon Dioxide CO2 Gas Sensor 0-5000ppm

SKU: 180866


¥ 176.00

Option not available

    This combination does not exist.

    Add to Cart

    Bulk Order Quote
    MH-Z19B carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose smart small-scale sensor that uses non-dispersive infrared (NDIR) principle to detect the presence of CO2 in the air, with good selectivity and anaerobic Gas dependence, long life and other characteristics; built-in temperature compensation; at the same time with serial output, analog output and PWM output, easy to use. The sensor is a high-performance sensor that combines mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design.
    1. Product model number: MH-Z19B
    2. Gas Detection: Carbon Dioxide
    3. Supply voltage: 4.5~5.5V DC
    4. Average current: <20mA (@5V power supply)
    5. Peak current: 150 mA (@5V supply)
    6. Interface level: 3.3V (5V compatible)
    7. Measurement range: 0~10000ppm can be selected within the range (see Table 2 for details)
    8. Output signal: Serial (UART) (TTL level 3.3V)
                            Analog output (DAC) (default 0.4~2V) (0~3V range configurable)
    9. Warm-up time: 3min
    10. Response time: T90<120s
    11. Working temperature: 0~50°C
    12. Operating Humidity: 0 to 95% RH (non-condensing)
    13. Weight: 5g
    14. Life: >5 years
    1. Gas chamber with gold plating, waterproof and corrosion resistant
    2. High sensitivity, low power consumption
    3. Excellent stability
    4. Temperature compensation, excellent linear output
    5. Provides serial (UART), analog (DAC), PWM waveform output methods
    6. long lasting
    7. Water vapor interference, not poisoning
    HVAC refrigeration equipment
    Air quality monitoring equipment
    Fresh air system
    Air purification equipment
    Smart home
    Pin Definition
    Vin: Power Positive (Vin)
    GND: Negative Power Supply (GND)
    Vo: Analog output
    PWM: PWM
    HD: HD (zero for school, low for more than 7 seconds)
    Rx: UART(RXD) TTL Level Data Input
    Tx: UART (TXD) TTL level data output
    Pin 1: Analog Output Vo
    Pin 2: None
    Pin 3: Negative Power Supply (GND)
    Pin 4: Positive Power Supply (Vin)
    Pin 5: UART(RXD) TTL Level Data Input
    Pin 6: UART (TXD) TTL Level Data Output
    Pin 7: None