RXC6 433Mhz / 315MHZ Superheterodyne Wireless Receiver PT2262 Code Steady

Price:

0.97


5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
1.06
1.06
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
5.14
5.14

RXC6 433Mhz / 315MHZ Superheterodyne Wireless Receiver PT2262 Code Steady

https://www.satistronix.com/web/image/product.template/6296/image_1920?unique=99581fd
(0 review)

1.66 1.6600000000000001 USD 1.66

¥ 12.00

Not Available For Sale


  • Frequency

This combination does not exist.


Categories :
Wireless Modules
SKU :
1940981
Share :
100% original guarantee
Return within 30days
Free delivery on all orders

Parameters: 

  • Working Frequency:433Mhz / 315MHZ 

  • Receiving Sensitivity:-110dBm 

  • Working Voltage:3.3V-5.5V 

  • Working Temperature:-30-85℃ 

  • Size:28X12.5X5mm(L*W*T)

Instructions:

  • Jogging:Both T1 and T2 do not connected, when there is signal input, the module will output the corresponding signal. 

  • Self-locking: T2 connect with the ground,T1 do not connect. 

  • Interlocking: T1 connect wiht the ground, T2 do not connect. 

  • Signal indicaotor: when there is signal input, the VT output high level, when signal disappear, VT output low level. 

  • Code matching: press the"learning key" and last 2s,the learning indicator will light up, now step into the learning mode,then release the learning key, press the any key, the indicator will flash 4 times,the learning has finished, exit the learning mode. 

  • Code match clearing:keep press the learning key,the indicator will always light up,after 8 seconds the indicator will turn off, the code has been cleared.

Pin instructions: 

  • ANT->antenna 

  • GND->power ground 

  • LED->extenal LED indicator 

  • SW->external learning key 

  • VT->remote control signal indicator(flashing when receive the remote control signal) 

  • D0-D3-> data output 

  • VDD->power positive 

  • GND->power ground