Davicom DM9000CEP LQFP-48 Ethernet Controller IC

Price:

0.12


5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
1.07
1.07
10W 15W 20W 25W 30W LED COB Module LED COB Round Panel DC 30V 59.5mm PCB 42mm Emitting Area Warm/ Natural White /White
10W 15W 20W 25W 30W LED COB Module LED COB Round Panel DC 30V 59.5mm PCB 42mm Emitting Area Warm/ Natural White /White
1.31
1.31

Davicom DM9000CEP LQFP-48 Ethernet Controller IC

https://www.satistronics.com/web/image/product.template/2047/image_1920?unique=99581fd
(0 review)

2.25 2.25 USD 2.25

¥ 16.19

Not Available For Sale


    This combination does not exist.


    Categories :
    Interface ICs
    SKU :
    182454
    Share :
    100% original guarantee
    Return within 30days
    Free delivery on all orders




    Description:

    The DM9000C/CI is a industrial-temperature fully

    integrated and cost-effective low pin count single chip

    Fast Ethernet controller with a general processor

    interface, a 10/100M PHY and 4K Dword SRAM. It is

    designed with low power and high performance

    process interface that support 3.3V with 5V IO

    tolerance.

    The DM9000C/CI supports 8-bit and 16-bit data

    interfaces to internal memory accesses for various

    processors. The PHY of the DM9000C/CI can interface to

    the UTP3, 4, 5 in 10Base-T and UTP5 in 100Base-TX with

    HP Auto-MDIX. It is fully compliant with the IEEE 802.3u

    Spec. Its auto-negotiation function will automatically

    configure the DM9000C/CI to take the maximum advantage

    of its abilities. The DM9000C/CI also supports IEEE 802.3x

    full- duplex flow control.

    Features:

    ■ Supports processor interface: byte/word of I/O

    command to internal memory data operation

    ■ Integrated 10/100M transceiver With HP

    Auto-MDIX

    ■ Supports back pressure mode for half-duplex

    ■ IEEE802.3x flow control for full-duplex mode

    ■ Supports wakeup frame, link status change and

    magic packet events for remote wake up

    ■ Support 100M Fiber interface.

    ■ Integrated 16K Byte SRAM

    ■ Build in 3.3V to 1.8V regulator

    ■ Supports early Transmit

    ■ Supports IP/TCP/UDP checksum generation and

    checking

    ■ Supports industrial-temperature (-40℃ ~ +85℃)

    (DM9000CIEP only)

    ■ Supports automatically load vendor ID and

    product ID from EEPROM

    ■ Optional EEPROM configuration

    ■ Very low power consumption mode:

    – Power reduced mode (cable detection)

    – Power down mode

    – Selectable TX drivers for 1:1 or 1.25:1

    transformers for additional power reduction.

    ■ Compatible with 3.3V and 5.0V tolerant I/O

    ■ DSP architecture PHY Transceiver.

    ■ 48-pin LQFP, 0.18 um process