Brand RepRap Megatronics V2.0 3D Printer Motherboard Main Control Panel Driver Board

SKU: 180430

Make an Inquiry

0 review(s) | Add your review

    46.96 46.96 Piece 46.96 USD

    ¥ 330.00

    Option not available

    This combination does not exist.

    Add to Cart

    Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device.


    • Improved thermo couple support.

    • Second thermo couple supported.

    • Support for 6 stepper drivers.

    • SMD fuses and MOSFETs.

    • Extra MOSFET, making 4 regular MOSFETs and one for heated bed.

    • Support for the new DRV8825 Pololu stepper drivers

    • The board can be powered from 12V1 (12V MAX), by setting a jumper

    • The LCD contrast can be adjusted with a trimpot.

    • 12V1 has a diode to protect against reverse polarization.

    • The 5V line is protected by a 500mA resettable fuse.

    • A piezo is included to allow the printer to give feedback with sound.

    • Each stepper driver slot has a breakout to connect external stepper drivers to the board.

    • Four layer high quality PCB board.