NB-IoT / eMTC / EDGE / GPRS / GNSS HAT for Raspberry Pi Based on SIM7000E

SKU: 1941005

36.74 36.74 Piece 36.74 USD

¥ 260.00

Option not available

This combination does not exist.

Add to Cart

Beschreibung

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+; Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc;Supports GNSS positioning (GPS,GLONASS,BeiDou and Galileo)

  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Breakout UART control pins, to connect with host boards like Arduino/STM32

  • Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor; SIM card slot, compatible with both normal SIM card and NB-IoT specific card

  • 2x LED indicators, easy to monitor the working status; Baudrate: 300bps~3686400bps; Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)

  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT;Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

  • Größe:SIM7000E NB-IoT HAT

Description:

  • This Raspberry Pi HAT features multi communication functionalities: NB-IoT, eMTC, EDGE, GPRS, and GNSS.

  • The NB-IoT (NarrowBand-Internet of Things) and eMTC (enhanced Machine Type Communication) are rising IoT communication technologies evolved from LTE (4G),with advantages include low power, )

  • low cost, wide coverage, etc. They are suited for applications such as intelligent instruments, remote controlling, asset tracking, remote monitoring, E-health, mobile POS terminals, sharing bikes, )

  • and so on. While the GSM/GPRS, and EDGE are traditional 2G/2.5G technologies capable of sending SMS or making other wireless communications.)

  • Therefore, the SIM7000E NB-IoT HAT would be an ideal choice for either evaluating new rising technologies, or simply communicating/positioning via multiple ways.

Features

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+

  • Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.

  • Supports GNSS positioning (GPS,GLONASS,BeiDou and Galileo)

  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on

  • Breakout UART control pins, to connect with host boards like Arduino/STM32

  • Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor

  • SIM card slot, compatible with both normal SIM card and NB-IoT specific card

  • 2x LED indicators, easy to monitor the working status

  • Baudrate: 300bps~3686400bps

  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)

  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USA

Package including:

  • Note: the Raspberry Pi in the photo is NOT included.

  • SIM7000E NB-IoT HAT x1

  • GSM Antenna x1

  • GPS External Antenna (B) x1

  • USB type A plug to micro plug cable x1

  • RPi screws pack (2pcs) x1