DSO FNIRSI-150 Digital Oscilloscope with Probe Fully Assembled

SKU: 1941136

24.22 21.80 Piece 21.8 USD

¥ 170.00

Option not available

This combination does not exist.

Add to Cart

Features:

  • Available rising or falling edge trigger.

  • Observable previous waveform before trigger(negative delay).

  • Can freeze waveform display at any time(HOLD function).

  • Come with instructions, easy to install and operate. 

  • Waveform storage function: will not lose the waveform after power off.

  • Short-circuit and open-circuit detection: can help the user find out the soldering error.

  • TFT controller recognition function.

  • The SMD has been soldered, more suitable for electronic beginner.

  • With Auto/Normal/Single trigger modes, easy to capture the moment waveform.

  • Adopt ARM Cortex-M3 processor (STM32F103C8), and include a 2.4-inch color TFT display screen.

  • Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.

  • With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.

Parameters:

  • Maximum Real-time Sampling Rate: 1MSa/s

  • Analog Bandwidth: 0-200KHz

  • Sensitivity Range: 5mV/div-20mV/idv

  • Maximum Input Voltage: 50Vpk (1X probe)

  • Input Impedance: 1M ohms/20pF

  • Accuracy: 12 Bits

  • Record Length: 1024 points

  • Coupling Modes: DC / AC / GND

  • Time Base Range: 500s/Div - 10us / Div 

  • Trigger Modes: Auto, Normal, and Single

  • Trigger Position: Center of Buffer

  • Supply Voltage: DC 9V(8-10V)

  • Current Consumption:~120mA @ 9V

  • Main Board Size: 94 * 65mm / 3.7 * 2.56in

  • Analog Board Size: 65 * 47mm / 2.56 * 1.85in

  • Screen Size: 52 * 40mm / 2 * 1.57in

  • Package Size: 14.5 * 10 * 3.7cm / 5.7 * 3.94 * 1.45in

Package List:

  • 1 * Fully Assembled Oscilloscope

  • 1 *  Probe

  • 1 * User Manual(English)