A87 4 Channel Optocoupler Isolation Module High and Low Level Expansion

Price:

1.31


5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
1.07
1.07
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
5.14
5.14

A87 4 Channel Optocoupler Isolation Module High and Low Level Expansion

https://www.satisled.com/web/image/product.template/6849/image_1920?unique=d8c7308
(0 review)

1.52 1.52 USD 1.52

¥ 11.00

Not Available For Sale


    This combination does not exist.


    Categories :
    Other Modules
    SKU :
    1941923
    Share :
    100% original guarantee
    Return within 30days
    Free delivery on all orders

    Product description:

    Function: Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage.

    HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma.

    This module uses TLP281 chip (for Toshiba).

    Schematic:



    Input and output instructions:
    Input: IN1 / IN2 / IN3 / IN4, then the microcontroller or Arduino IO port, GND and the Arduino development board connected to the GND.
    IN1 / IN2 / IN3 / IN4 controls OUT1 / OUT2 / OUT3 / OUT4, respectively.
    Output: OUT1 / OUT2 / OUT3 / OUT4
    Output: HVCC: Connect the controlled high voltage positive, HGND connected to the controlled high voltage negative
    Use: When IN1 is high, the corresponding OUT1 voltage is equal to HVCC, when IN1 is low, the OUT1 voltage is equal to HGND

    Use examples:
    The following example shows how to use the microcontroller's IO port to control the 24V motor rotation. Figure motor operating voltage of 24V,
    red "+" that the motor power positive, black "-" that the motor power supply negative. When the microcontroller IO_0 output high, the motor rotate,
    when the IO_0 port output low, the motor stops rotating.