1Hz-150Khz 3.3V-30V PWM Pulse Frequency Duty Cycle LCD Display Signal Generator

Price:

6.19


5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
1.08
1.08
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
5.23
5.23

1Hz-150Khz 3.3V-30V PWM Pulse Frequency Duty Cycle LCD Display Signal Generator

https://www.satisled.com/web/image/product.template/6457/image_1920?unique=23c53c7
(0 review)

1.65 1.6500000000000001 USD 1.65

¥ 11.70

Not Available For Sale


    This combination does not exist.


    Categories :
    Signal Generator
    SKU :
    1941158
    Share :
    100% original guarantee
    Return within 30days
    Free delivery on all orders

    Features:

    • Support Serial operation

    • Wide frequency range,high precision

    • LCD can display frequency and duty datio,Easy to oprate

    • Output of three-channel PWM at the same time, Adjustable frequency,3-channel frequency output consistent,duty ratio can be independently adjusted,suitable for most occasions

    Parameters:

    • Operating voltage: 3.3~30V;

    • Frequency range: 1Hz~150KHz;

    • Frequency accuracy: In each range of accuracy is about 2%

    • Signal load capacity: Output current can be around 5~30ma

    • Output amplitude: PWM amplitude and supply voltage equal 

    • Ambient temperature: -20~+70°

    Frequency is divided into four areas,automatic switching:

    • 1.XXX(No decimal point): 1HZ Stepping Unit,Range:1Hz~999Hz;

    • 2.X.XX(The decimal is in the hundreds place):0.01KHZ Stepping Unit,Range: 1.00Khz~9.99Khz;

    • 3.X.XX(The decimal is in the tens place):0.1KHZ Stepping Unit,Range: 10.0Khz~99.9Khz;

    • 4.X.X.X(The decimal is in the ones place):1KHZ Stepping Unit,Range: 1Khz~150Khz;

    • e.g. ,frequency display:100 represent the pulse of 100Hz ;

    • 1.01 represent the pulse of 1.01KHz; 

    • 54.1 represent the pulse of 54.1KHz

    • 1.2.4 represent the pulse of 124Hz

    Application:

    • Used as square wave signal generator to generate square wave signal for experiment development and use

    • Used to generate a square wave signal to control the motor driver;

    • Generating adjustable pulses for MCU use;

    • Generate adjustable pulse, control related circuit (PWM dimming speed and other applications).

    UART Serial command:

    • Baud rate: 9600 bps Data length:8

    • Stop bits:1

    • Check digit: none

    • Flow control: none

    1.set the frequency of the PWM 

    • "F101": Set frequency of 101 HZ (001~999)

    • "F1.05": Set frequency of 1.05 KHZ(1.00~9.99)

    • "F10.5": Set frequency of 10.5KHZ(10.0~99.9)

    • "F1.0.5":Set frequency of 105KHZ(1.0.0~1.5.0)

    2.set the duty ratio of PWM

    • "DX:YYY": Set PWM duty ratio x: (1~3) PWM serial number,YYY: (000~100) duty ratio;

    • For example d1:050,set 1th PWM duty ratio to 50%

    • 3.Read Setup parameters

    • Send a "read" string to read the parameters of the setting.

    • Message format:F156,D1:052,D2:059,D3:058,

    • Set successful return:DOWN

    • Set failed to return:FALL