DSO FNIRSI-150 0-200KHz Analog Bandwidth 1MS Sampling Rate Digital Oscilloscope with P6020 Standard Probe

SKU: 1941122

25.91 23.32 Piece 23.32 USD

¥ 183.00

Option not available

This combination does not exist.

Add to Cart

Features:

  • Adopts ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen

  • Used for secondary development on the basis of this kit, for example, it can be changed to millivoltmeter, data loggers

  • Come with instructions, easy to install and operate

  • Auto/normal/single trigger modes, easy to capture the moment waveform

  • Available rising or falling edge trigger

  • Observable previous waveform before trigger (negative delay)

  • Can freeze waveform display at any time (HOLD function)

  • Waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak Peak/virtual values

  • Waveform storage function: Will not lose the waveform after powering off

  • Short-circuit and open-circuit detection: Can help the user find out the soldering error

  • TFT controller recognition function

  • The SMD has been soldered, more suitable for electronic beginners

Parameters:

  • Maximum real-time sampling rate: 1 MSa/s

  • Analog bandwidth: 0 - 200 KHz

  • Sensitivity range: 5 – 20 mV/div

  • Maximum input voltage: 50 Vpk (1X probe)

  • Input impedance: 1M ohms/20pF

  • Accuracy: 12 bits

  • Record length: 1024 points

  • Coupling modes: DC / AC / GND

  • Time Base Range: 500s/Div – 10us / Div

  • Trigger modes: Auto, normal, and single

  • Trigger position: Center of buffer

  • Supply voltage: DC 9 V (8 – 10 V)

  • Current consumption: ~120 mA @ 9 V

  • Main board size: 94 x 65 mm (3.7 x 2.56 in)

  • Analog board size: 65 x 47 mm (2.56 x 1.85 in)

  • Screen size: 52 x 40 mm (2 x 1.57 in)

  • Package size: 14.5 x 10 x 3.7 cm (5.7 x 3.94 x 1.45 in)