DSO FNIRSI-138 1MS Sampling Rate 2.4" TFT Digital Oscilloscope with Probe

SKU:

Make an Inquiry

0 review(s) | Add your review

    12.81 12.81 Piece 12.81 USD

    ¥ 90.00

    Option not available

    • Package

    This combination does not exist.

    Add to Cart

    Features:

    • TFT controller recognition function.

    • Available rising or falling edge trigger.

    • Observable previous trigger waveform (negative delay).

    • Can freeze at any time waveform display (HOLD function).

    • Comes 1Hz /3.3V square wave test signal source.

    • Adjustable vertical displacement, and with instructions.

    • Waveform storage function: will not lose the waveform after power off.

    • Short-circuit and open-circuit detection: can help the user find out the soldering error.

    • Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter and data loggers.

    • With automatic, regular and one-shot modes, easy to capture the moment waveform.

    • With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.

    • This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.

    Parameters:

    • Maximum Real-time Sampling Rate: 1Msps

    • Accuracy: 12Bit

    • Input Impedance: 1MΩ

    • Supply Voltage: DC 9V

    • Sampling Buffer Depth: 1024 bytes

    • Analog Bandwidth: 0-200KHz

    • Coupling Modes: DC / AC / GND

    • PCB Size: 117 * 76mm / 4.6 * 3in

    • Screen Size: 52 * 40mm / 2 * 1.57in

    • Package Size: 18 * 12.5 * 3cm / 7.08 * 4.92 * 1.18in

    • Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)

    • Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)

    • The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)

    Package One Include: 

    • 1 DSO138 soldered oscilloscope kit

    • 1 probe

    • 1 user manual(English)

    Package Two Include:

    • 1 * DSO FNIRSI-138 Full Assembled Oscilloscope

    • 1 * Probe

    • 1 * P6100 Probe

    • 3 * User Manual(English)

    Note: This DIY kit is soldered.