DSO FNIRSI-138 1MS Sampling Rate 2.4" TFT Digital Oscilloscope with Probe

Price:

25.76


5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
5W CREE XTE S3 High Power LED 8-20mm PCB Emitter Warm Neutral White Blue
1.06
1.06
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
30W 40W 50W Driverless LED Light COB Chip Spotlight Size 110x58mm Emitting 60x30mm
5.12
5.12

DSO FNIRSI-138 1MS Sampling Rate 2.4" TFT Digital Oscilloscope with Probe

https://www.satistronix.com/web/image/product.template/6429/image_1920?unique=fb4d6cf
(0 review)

18.73 18.73 USD 18.73

¥ 136.00

Not Available For Sale


  • Package

This combination does not exist.


Categories :
Digital Oscilloscope
SKU :
1941131
Share :
100% original guarantee
Return within 30days
Free delivery on all orders

Features:

  • TFT controller recognition function.

  • Available rising or falling edge trigger.

  • Observable previous trigger waveform (negative delay).

  • Can freeze at any time waveform display (HOLD function).

  • Comes 1Hz /3.3V square wave test signal source.

  • Adjustable vertical displacement, and with instructions.

  • Waveform storage function: will not lose the waveform after power off.

  • Short-circuit and open-circuit detection: can help the user find out the soldering error.

  • Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter and data loggers.

  • With automatic, regular and one-shot modes, easy to capture the moment waveform.

  • With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.

  • This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.

Parameters:

  • Maximum Real-time Sampling Rate: 1Msps

  • Accuracy: 12Bit

  • Input Impedance: 1MΩ

  • Supply Voltage: DC 9V

  • Sampling Buffer Depth: 1024 bytes

  • Analog Bandwidth: 0-200KHz

  • Coupling Modes: DC / AC / GND

  • PCB Size: 117 * 76mm / 4.6 * 3in

  • Screen Size: 52 * 40mm / 2 * 1.57in

  • Package Size: 18 * 12.5 * 3cm / 7.08 * 4.92 * 1.18in

  • Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)

  • Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)

  • The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)

Package One Include: 

  • 1 DSO138 soldered oscilloscope kit

  • 1 probe

  • 1 user manual(English)

Package Two Include:

  • 1 * DSO FNIRSI-138 Full Assembled Oscilloscope

  • 1 * Probe

  • 1 * P6100 Probe

  • 3 * User Manual(English)

Note: This DIY kit is soldered.